Rear Combination Light Assembly: Disassembly
- REMOVE REAR COMBINATION LIGHT BODY GASKET
- Remove the rear combination light body gasket.
NOTE:
- Be sure to remove all the traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE REAR TURN SIGNAL LIGHT BULB
- Turn the rear turn signal light bulb and the rear light socket and wire in the direction indicated by the arrow and disconnect them as a unit.
- Remove the rear turn signal light bulb from the rear light socket and wire.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE REAR LIGHT SOCKET AND WIRE
- Disconnect the connector and remove the rear light socket and wire.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE REAR COMBINATION LIGHT LENS AND BODY
- REMOVE REAR COMBINATION LIGHT BODY GASKET
- Remove the rear combination light body gasket.
NOTE:
- Be sure to remove all the traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE BACK UP LIGHT BULB
- Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.
- Remove the back up light bulb from the rear light socket and wire.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE REAR LIGHT SOCKET AND WIRE
- Disconnect the connector.
- Remove the rear light socket and wire.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE REAR LIGHT LENS