Stop Light Switch: Inspection
- INSPECT STOP LIGHT SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard resistance
STOP LIGHT SWITCH ASSEMBLY RESISTANCETester Connection Condition Specified Condition 1 - 2 Pin pushed 10 kΩ or higher Pin not pushed Below 1 Ω 3 - 4 Pin pushed Below 1 Ω Pin not pushed 10 kΩ or higher If the result is not as specified, replace the stop light switch.
- Measure the resistance according to the value(s) in the table below.