Terminals and Reference Value for Sliding Door Latch Control Unit

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

TERMINALS AND REFERENCE VALUE FOR SLIDING DOOR LATCH CONTROL UNIT

Terminal	Wire Color	Item	Condition	Voltage (V) (Approx.)
1	G	Neutral switch signal	Sliding door Fully open → half → fully closed	Courtesy of NISSAN MOTOR CO., U.S.A.
2	Y	Cinch latch motor RETURN signal	Sliding door Fully open → half → fully closed	Courtesy of NISSAN MOTOR CO., U.S.A.
3	G/B	Cinch latch motor CLOSE output	Latch Open (ON) → Closed (OFF)	Courtesy of NISSAN MOTOR CO., U.S.A.
3	G/B	Cinch latch motor CLOSE output	Other than above	0
5	SB	Handle switch (open) signal	Handle operation	0
5	SB	Handle switch (open) signal	Other than above	5
6	GR/L	Cinch latch motor CLOSE signal	Sliding door Fully open → half → fully closed	Courtesy of NISSAN MOTOR CO., U.S.A.
7	LG	Full-latch switch signal	Sliding door Fully open → half → fully closed	Courtesy of NISSAN MOTOR CO., U.S.A.
8	O/B	Half-latch switch signal	Sliding door Fully open → half → fully closed	Courtesy of NISSAN MOTOR CO., U.S.A.
9	L/B	Cinch latch motor OPEN output	Latch Close (OFF) → Open (ON)	Courtesy of NISSAN MOTOR CO., U.S.A.
9	L/B	Cinch latch motor OPEN output	Other than above	0
10	R/W	Latch release actuator output	Latch (Lock → Unlock)	0 → Momentarily above 0
10	R/W	Latch release actuator output	Other than above	0