Physical Values
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 2 (BR) | 3 (L) | Sound signal front door speaker and front tweeter LH | Output | Ignition switch ON | Audio output | |
| 4 (G) | 5 (B) | Sound signal rear door speaker and rear tweeter LH | Output | Ignition switch ON | Audio output | |
| 6 (Y) | 15 (L) | Steering switch signal A | Input | Ignition switch ON | Press and hold MODE switch. | 0V |
| Press and hold Δ switch. | 0.75V | |||||
| Press and hold VOL up switch | 2V | |||||
| Except for above. | 5V | |||||
| 7 (G/Y) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 9 (V) | Ground | Illumination signal | Input | OFF | Lighting switch is OFF. | 0V |
| Lighting switch is ON. | Battery voltage | |||||
| 11 (LG) | 12 (R) | Sound signal front door speaker and front tweeter RH | Output | Ignition switch ON | Voice output | |
| 13 (GR) | 14 (O) | Sound signal rear door speaker and rear tweeter RH | Output | Ignition switch ON | Voice output | |
| 15 (L) | Ground | Steering switch signal GND | - | Ignition switch ON | - | 0V |
| 16 (G) | 15 (L) | Steering switch signal B | Input | Ignition switch ON | Press and hold POWER switch | 0V |
| Press and hold DOWN TRIANGLE switch | 0.75V | |||||
| Press and hold VOL down switch | 2V | |||||
| Except for above | 5V | |||||
| 19 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 20 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 34 | - | Antenna main | - | - | - | - |
| 35 | - | Antenna power | Output | Ignition switch ON | With AM/FM radio selected | 12V |
| 36 (G) | Ground | AUX image signal | Output | Ignition switch ON | When AUX mode is selected | |
| 37 (R) | Ground | AUX image ground | - | Ignition switch ON | - | 0V |
| 38 (R) | Ground | RGB signal (B: blue) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 39 (B) | Ground | RGB signal (G: green) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 40 (W) | Ground | RGB signal (R: red) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 41 (R) | Ground | RGB synchronizing signal | Output | Ignition switch ON | - | |
| 42 | - | RGB synchronizing ground | - | Ignition switch ON | - | 0V |
| 43 (G) | Ground | RGB area (YS) signal | Output | Ignition switch ON | RGB image | 5V |
| AUX image | ||||||
| 44 (LG) | Ground | Communication signal (DISP→CONT) | Input | Ignition switch ON | When adjusting display brightness | |
| 45 (B) | Ground | Horizontal synchronizing (HP) signal | Input | Ignition switch ON | - | |
| 46 (BR) | Ground | Signal ground | - | Ignition switch | - | 0V |
| 47 (R) | Ground | Signal VCC | Output | Ignition switch ACC | - | 9V |
| 54 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 56 (V) | Ground | Communication signal (CONT→DISP) | Output | Ignition switch ON | When adjusting display brightness | |
| 57 (W) | Ground | Vertical synchronizing (VP) signal | Input | Ignition switch On | - | |
| 58 (SB) | Ground | Inverter ground | - | Ignition switch ON | - | 0V |
| 59 (O) | Ground | Inverter VCC | Output | Ignition switch ACC | - | 9V |
| 64 (W) | Ground | Rear view camera video signal ground | - | Ignition switch ON | - | 0V |
| 65 (B) | Ground | Rear view camera video in (+) | Input | Ignition switch ON | With rear view camera ON | |
| 68 (B) | Ground | Rear view camera signal (ground) | - | Ignition switch ON | - | 0V |
| 72 | - | Shield | - | - | - | - |
| 85 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 86 (L) | - | CAN-H | Input/Output | - | - | - |
| 87 (P) | - | CAN-L | Input/Output | - | - | - |
| 88 (L) | - | AV communication signal 1 (H) | Input/Output | - | - | - |
| 89 (P) | - | AV communication signal 1 (L) | Input/Output | - | - | - |
| 90 (L) | - | AV communication signal 2 (H) | Input/Output | - | - | - |
| 91 (P) | - | AV communication signal 2 (L) | Input/Output | - | - | - |
| 95 (W) | 97 (R) | AUX audio signal RH | Input | Ignition switch ON | When AUX mode is selected | |
| 96 (B) | 97 (R) | AUX audio signal LH | Input | Ignition switch ON | When AUX mode is selected | |
| 101 (GR) | Ground | A/C and AV switch assembly ground | - | Ignition switch ON | - | 0V |
| 103 (SB) | Ground | CD eject signal | Input | - | Pressing the eject switch | 0V |
| Except for above | 3.3V | |||||
| 104 (W/G) | Ground | Ignition signal | Input | Ignition switch ON | - | Battery voltage |
| 105 (W) | Ground | Reverse signal | Input | Ignition switch ON | R position | Battery voltage |
| Other than R position | 0V | |||||
| 106 (G) | Ground | Parking brake signal | Input | Ignition switch ON | Parking brake ON | 0V |
| Parking brake OFF | Battery voltage | |||||
| 107 (LG) | Ground | Vehicle speed signal (8-pulse) | Input | Ignition switch ON | When vehicle speed is approx. 40 km/h (25MPH) | |