LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> Hazard Warning Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hazard Warning Switch: Installation

  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY 
    1. Attach the 2 claws and install the hazard warning signal switch.
    2. Connect the connector.
      Fig 1: Identifying Connector
      G04944968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Multi-display)  (See INSTALLATION )
  3. INSTALL MULTI-MEDIA MODULE DISPLAY ASSEMBLY (w/ Multi-display)  (See INSTALLATION )
  4. INSTALL RADIO RECEIVER ASSEMBLY  (See INSTALLATION )
  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER  (See INSTALLATION )
  6. INSTALL REAR CONSOLE PANEL UPPER  (See INSTALLATION )
  7. INSTALL NO. 3 BOX PANEL  (See INSTALLATION )
  8. INSTALL SHIFT LEVER KNOB  (See INSTALLATION )
  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
  13. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals