Door Control Receiver: Installation
- INSTALL DOOR CONTROL RECEIVER
- Install the receiver with the nut.
- Connect the connector.NOTE: When replacing or inspecting the door control receiver and wire harness, do not change the position or length of the wire harness. If the wire harness is too close to the door control receiver, entry and wireless function performance may be affected.
- INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH (See INSTALLATION )
- INSTALL REAR FLOOR FINISH PLATE (See INSTALLATION )
- INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (See INSTALLATION )
- INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) (See INSTALLATION )
- INSTALL LUGGAGE COMPARTMENT NO. 2 TRIM HOOK (See INSTALLATION )
- INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (See INSTALLATION )
- INSTALL DECK TRIM SIDE BOARD RH (See INSTALLATION )
- INSTALL ROPE HOOK (See INSTALLATION )
- INSTALL ROPE HOOK ASSEMBLY (See INSTALLATION )
- INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (See INSTALLATION )