Door Control Switch: Installation

INSTALL DOOR CONTROL SWITCH ASSEMBLY
1. Install the control switch with the 2 claws.
  
  Fig 1: Identifying Control Switch With Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 connectors.
  
  Fig 2: Locating Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the armrest base assembly with the 2 clamps.
  
  Fig 3: Identifying Armrest Base Assembly With Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.