Front Door Lock: Installation

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. INSTALL FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY LH  (See INSTALLATION )
2. INSTALL FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH  (See INSTALLATION )
3. INSTALL FRONT DOOR LOCK ASSEMBLY LH  (See INSTALLATION )
4. INSTALL FRONT DOOR LOWER FRAME GARNISH PAD LH  (See INSTALLATION )
5. INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH  (See INSTALLATION )
6. INSTALL FRONT DOOR FRAME SUB-ASSEMBLY REAR LOWER LH  (See INSTALLATION )
7. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH  (See INSTALLATION )
8. INSTALL FRONT DOOR SERVICE HOLE COVER LH  (See INSTALLATION )
9. INSTALL FRONT DOOR TRIM COVER LH  (See INSTALLATION )
10. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH  (See INSTALLATION )
11. INSTALL FRONT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY LH  (See INSTALLATION )
12. INSTALL DOOR INSIDE HANDLE BEZEL  (See INSTALLATION )
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
14. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
15. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
       NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.