LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel >> Fuel Pump >> Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Pump: Inspection

  1. INSPECT FUEL PUMP ASSEMBLY 
    1. Check the resistance of the fuel pump.
      1. Measure the resistance according to the value(s) in the table below.
        Fig 1: Inspecting Fuel Pump Assembly
        G04948036Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Standard resistance 

        FUEL PUMP ASSEMBLY

        Tester Connection Condition Specified Condition
        1-2 20°C (68°F) 0.2 to 3.0 Ω

        If the result is not as specified, replace the fuel pump.

    2. Inspect the operation of the fuel pump.
      1. Connect the battery's positive (+) lead to terminal 1 of the connector, and the negative (-) lead to terminal 2. Check that the fuel pump operates.
        NOTE:
        • These tests must be performed within 10 seconds to prevent the coil from burning out.
        • Keep the fuel pump as far away from the battery as possible.
        • Always turn the voltage on and off on the battery side, not the fuel pump side.
scientia non olet · About LEMON Manuals