1. Security Indicator Lamp Active Test

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II

Check "THEFT IND" in "ACTIVE TEST" mode with CONSULT-II.

Fig 1: Checking Security Indicator Lamp With CONSULT-II (Active Test)

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II

Disconnect BCM.
Check voltage between BCM harness connector M18 terminal 23 and ground.

Fig 2: Connector Terminals Voltage Specifications (M 18)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Checking Security Indicator Lamp Without CONSULT-II (Active Test)

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK >> Security indicator lamp is OK.
NG >> GO TO 2