DTC Confirmation Procedure
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
: GO TO 2.
- PERFORM DTC CONFIRMATION PROCEDURE
- Start engine and wait at least 40 seconds.NOTE: Do not depress accelerator pedal even slightly.
- Check 1st trip DTC.
Is 1st trip DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Start engine and wait at least 40 seconds.