DTC Confirmation Procedure
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PRECONDITIONING
TESTING CONDITION:
Before performing the following procedure, confirm that battery voltage is more than 10.5 V at idle.
: GO TO 2.
- PERFORM DTC CONFIRMATION PROCEDURE
- Start engine and let it idle for at least 60 seconds.
- Check 1st trip DTC.
Is 1st trip DTC detected?
YES: "DIAGNOSIS PROCEDURE "
NO: INSPECTION END