Customize Parameters

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM (REFERENCE)

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the intelligent tester or Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the tester on.
Enter the following menus:
1. Intelligent tester - Select: CUSTOMIZE /
2. Techstream - Select: Customize Setting /

Select the setting by referring to the table below.

Intelligent tester

AIR CONDITIONER

INTELLIGENT TESTER - AIR CONDITIONER REFERENCE CHART

Display	Default	Contents	Setting
SET TEMP SHIFT	NORMAL	To control with the shifted temperature against the display temperature	+2 C / +1 C / NORMAL / -1 C / -2 C
AIR INLET MODE	AUTO	In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode	MANUAL/AUTO
COMPRESSOR MODE	AUTO	Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF	MANUAL/AUTO
COMPRS/DEF OPER	LINK	Function to turn the A/C ON automatically linked with the FRONT DEF button when A/C is OFF	NORMAL / LINK
EVAP CTRL	AUTO	Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power, or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up	MANUAL/AUTO
GAS SENS SHIFT	NORMAL	Function to change the sensitivity of the exhaust gas sensor	MU MORE / MORE / LI MORE / NORMAL / LI LESS / LESS / MU LESS
BUTTON PRS BUZ	ON	Function to sound a buzzer when button is pressed	OFF / ON
FOOT/DEF MODE	ON	Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON	OFF / ON
AUTO BLOW UP	ON	Function to change the blower level automatically when the defroster is ON	OFF / ON
FILTER SENS	NORMAL	Function to change the sensitivity of the air conditioning filter clogging sensor	LESS/NORMAL / MORE
AMBIENT TMP SFT	NORMAL	Function to control the shifted ambient temperature in relation to the displayed ambient temperature	+3 C / +2 C / +1 C / NORMAL / -1 C/-2 C/-3 C

Techstream

Air Conditioner

TECHSTREAM - AIR CONDITIONER REFERENCE CHART

Display	Default	Contents	Setting
Set Temperature Shift	Normal	To control with the shifted temperature against the display temperature	+2 C / +1 C / Normal / -1 C / -2 C
Air Inlet Mode	Automatic	In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode	Manual / Automatic
Compressor Mode	Automatic	Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF	Manual / Automatic
Compressor/Air Inlet DEF operation	Link	Function to turn the A/C ON automatically linked with the FRONT DEF button when A/C is OFF	Normal / Link
Evaporator Control	Automatic	Function to set the evaporator control to the AUTOMATIC position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up	Manual / Automatic
Emission Gas Sensor Shift	Normal	Function to change the sensitivity of the exhaust gas sensor	Much More / More / Little More / Normal / Little Less / Less / Much Less
Button Press Buzzer	ON	Function to sound a buzzer when button is pressed	OFF / ON
Foot/DEF Auto Mode	ON	Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON	OFF / ON
Foot/DEF Automatic Blow Up Function	ON	Function to change the blower level automatically when the defroster is ON	OFF / ON
Filter Sensor	Normal	Function to change the sensitivity of the air conditioning filter clogging sensor	Less / Normal / More
Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature	+3C/+2C/+1 C/Normal/-1 C / -2 C / -3 C