Ambient Temperature Sensor: Installation
- INSTALL AMBIENT TEMPERATURE SENSOR
- Attach the clamp to install the sensor.
- Connect the connector.
- INSTALL FRONT BUMPER COVER
- Install the front bumper cover (see INSTALLATION ).
- INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).
- CHECK SRS WARNING LIGHT
- Check the SRS warning light (see DIAGNOSIS SYSTEM ).