Cellular Phone cannot Send / Receive

1. Check if the BLUETOOTH settings are correct.

OK: 

BLUETOOTH settings are correct. 

NG: SET SETTINGS CORRECTLY 

OK: Go To Next Step 

1. Check if the cellular phone is BLUETOOTH capable.

HINT:

Some versions of BLUETOOTH capable cellular phones may not be compatible.

OK: 

The phone is BLUETOOTH capable. 

NG: END (ONLY A BLUETOOTH CAPABLE CELLULAR PHONE CAN BE USED) 

OK: Go To Next Step 

1. Check if the cellular phone functions.

HINT:

• The cellular phone is unable to make a call under any of the following conditions.
• The cellular phone is locked.
• The dictionary is being transferred.
• The line is crossed.
• Transmission is requested.
• The power is off.
• The cellular phone is not connected to BLUETOOTH ("BT" is displayed while a connection is present).

OK: 

No of the above conditions exist. 

NG: SET SETTING CORRECTLY 

OK: Go To Next Step 

1. Check if the cellular phone can make a call.

HINT:

When the battery charge is low, calls cannot be made or received.

OK: 

The cellular phone can make a call. 

NG: REPLACE CELLULAR PHONE 

OK: Go To Next Step 

1. Put a cellular phone into a receiving state.
2. Place the cellular phone close to the multi-display.
3. Check if the cellular phone has reception according to the multi-display.

OK: 

The cellular phone has reception. 

NG: REPLACE MULTI-DISPLAY 

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE