September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Engine Coolant Temperature Sensor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- DRAIN ENGINE COOLANT (see
REPLACEMENT
)
- REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL
)
- REMOVE INTAKE AIR CONNECTOR PIPE (See REMOVAL
)
- REMOVE THROTTLE BODY (See REMOVAL
)
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Disconnect the sensor connector.
- Remove the sensor.
- Remove the gasket from the sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002