How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the procedure to troubleshoot the power door lock control system.
*: Use the Intelligent tester.

VEHICLE BROUGHT TO WORKSHOP
INSPECT BATTERY VOLTAGE
Standard voltage: 11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

PROBLEM SYMPTOMS TABLE

Result

RESULT REFERENCE

Result	Proceed to
Fault is not listed in problem symptoms table	A
Fault is listed on problem symptoms table	B

B: Go to step 5

A: Go TO NEXT STEP.

OVERALL ANALYSIS AND TROUBLESHOOTING*
1. OPERATION CHECK .
2. TERMINALS OF ECU .
3. DATA LIST / ACTIVE TEST .
ADJUST, REPAIR OR REPLACE
CONFIRMATION TEST
END