Radio Receiver: Installation

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
1. Install the No. 1 radio bracket to the radio receiver with the 4 bolts.
  
  Fig 1: Locating No. 1 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the No. 2 radio bracket to the radio receiver with the 4 bolts.
3. Connect all the connectors.
4. Attach the 4 claws to install the radio receiver.
5. Install the 4 bolts.
Fig 2: Locating No. 2 Radio Bracket Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Identifying Claws And Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER (see INSTALLATION )
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER (see INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL