Engine Coolant Temperature Sensor: Installation
WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ENGINE COOLANT TEMPERATURE SENSOR
- Install a new gasket onto the sensor.
- Using SST, install the sensor.
SST 09817-33190
Torque: 19.6 N*m (200 kgf*cm, 14 ft.*lbf)
- Connect the sensor connector.
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- ADD ENGINE COOLANT (see REPLACEMENT )
- CHECK FOR COOLANT LEAKS (see ON-VEHICLE INSPECTION )