Cruise Control Main Switch: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT CRUISE CONTROL MAIN SWITCH

Measure the resistance of the switch.

Standard resistance

CRUISE CONTROL MAIN SWITCH

Tester Connection	Switch Condition	Specified Condition
3 - 4	+/RES	216 to 264 Ω
	-/SET	567 to 693 Ω
	CANCEL	1,386 to 1,694 Ω
	Cruise control switch ON	Below 1 Ω
	Cruise control switch OFF	10 kΩ or higher

If the result is not as specified, replace the switch assembly.

Fig 1: Inspecting Cruise Control Main Switch