Map Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MAP LIGHT BULB
1. Install the map light bulb into the light socket.
2. Turn the map light bulb socket and bulb, in the direction indicated by the arrows in the illustration.
  
  Fig 1: Turning Map Light Bulb Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL MAP LIGHT ASSEMBLY
1. Connect the connector.
2. Engage the 4 claws and install the map light.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 2: Identifying Map Light Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002