Map Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE MAP LIGHT ASSEMBLY
1. Using a roof moulding remover, disengage the 4 claws.
2. Disconnect the connector, and remove the map light.
  
  Fig 1: Identifying Roof Moulding Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE MAP LIGHT BULB
1. Turn the 2 map light sockets and bulbs, in the direction indicated by the arrows in the illustration, to remove them.
2. Remove the 2 map light bulbs from the light socket.
  
  Fig 2: Turning Map Light Sockets And Bulbs
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002