Room Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ROOM LIGHT ASSEMBLY
1. Install room light bulb No. 1.
2. Engage the 4 claws and install the room light switch base.
3. Install the roof wire into the claw of the room light.
  
  Fig 1: Installing Room Light Switch Base Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Engage the 4 claws and install the room light.
  
  Fig 2: Identifying Room Light Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Engage the 4 claws and install the 2 covers.
  
  Fig 3: Identifying Covers Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Engage the 4 claws and install the room light lens.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 4: Identifying Room Light Lens Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002