Service Data
WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
AXLE - SERVICE DATA SPECIFICATION
| Front axle hub bearing backlash | Maximum | 0.05 mm (0.0020 in.) |
|---|---|---|
| Front axle hub bearing runout | Maximum | 0.05 mm (0.0020 in.) |
| Rear axle shaft bearing backlash | Maximum | 0.05 mm (0.0020 in.) |
| Rear axle shaft bearing runout | Maximum | 0.05 mm (0.0020 in.) |
| Rear axle shaft runout | Maximum | 1.5 mm (0.0591 in.) |
| Rear axle shaft flange runout | Maximum | 0.05 mm (0.0020 in.) |