Torque Specifications
WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS CHART
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Power steering vane pump | |||
| Vane pump housing rear x Vane pump housing front | 22 | 224 | 16 |
| Pressure port union | 69 | 704 | 51 |
| Suction port union set bolt | 9.0 | 92 | 80 in.*lbf |
| Vane pump assembly x Engine | 21 | 214 | 15 |
| Pressure feed tube assembly x Vane pump assembly | 44 (42) | 449 (428) | 33(31) |
(): For use without SST
TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| No. 1 Engine under cover Body | 29 | 296 | 21 |
| Rear Engine under cove x Body for 4WD | 29 | 296 | 21 |
| Power steering link assembly | |||
| Control valve housing set bolt | 18 | 184 | 13 |
| Rack guide spring cap lock nut | 69(65) | 700 (660) | 51 (48) |
| Power steering rack x Rack end | 103 (98) | 1,050(1,000) | 76 (72) |
| Tie rod assembly lock nut | 88 | 897 | 65 |
| Turn pressure tube union nut | 25 (23) | 250 (235) | 18(17) |
| Power steering link assembly set bolt and nut | 100 | 1,020 | 74 |
| Pressure feed and return tubes x Control valve housing | 25 (23) | 250 (235) | 18(17) |
| Pressure feed tube clamp set bolt | 28 | 286 | 21 |
| Outlet return tube | 44 (42) | 499 (428) | 33(31) |
| Tie rod end x steering knuckle | 49 | 500 | 36 |
(): For use without SST