Amplifier Box Speaker Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL AMPLIFIER BOX SPEAKER ASSEMBLY
1. Install the amplifier box speaker with the 4 screws.
  Torque: 8.1 N*m (85 kgf*cm, 72 in.*lbf)
  
  Fig 1: Identifying Amplifier Box Speaker Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the speaker connector.
INSTALL SPEAKER MOUNTING COVER
1. Engage the 8 clips and install the speaker mounting cover.
Fig 2: Identifying Speaker Mounting Cover Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DECK SIDE GARNISH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)