Radio Receiver: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL RADIO RECEIVER ASSEMBLY
1. Connect the plug, the head unit connector and the 2 radio connectors.
  
  Fig 1: Identifying Head Unit And Radio Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.
  Torque: 2.5 N*m (25 kgf*cm, 22 in.*lbf)
INSTALL INTEGRATION CONTROL PANEL ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL GARNISH RH (See INSTALLATION )
INSTALL INSTRUMENT PANEL GARNISH LH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)