Radio Receiver: Reassembly
WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL RADIO BRACKET RH
- Align the 4 bosses of the radio bracket with the hole in the radio receiver and install the radio bracket with the 4 screws.
Torque: 2.5 N*m (25 kgf*cm, 22 in.*lbf)
- Align the 4 bosses of the radio bracket with the hole in the radio receiver and install the radio bracket with the 4 screws.
- INSTALL RADIO BRACKET LH
HINT:
Use the same procedure as for the RH side.