Cruise Control Main Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CRUISE CONTROL MAIN SWITCH
1. Install the cruise control main switch with the 2 screws.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
2. Connect the connector.
  
  Fig 1: Identifying Cruise Control Main Switch And Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD (See REMOVAL )
INSTALL NO. 3 LOWER STEERING WHEEL COVER (See REMOVAL )
INSTALL NO. 2 LOWER STEERING WHEEL COVER (See REMOVAL )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )