Cruise Control Main Switch: Removal

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See PRECAUTION ).

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
REMOVE NO. 2 LOWER STEERING WHEEL COVER (See REMOVAL )
REMOVE NO. 3 LOWER STEERING WHEEL COVER (See REMOVAL )
REMOVE STEERING PAD (See REMOVAL )
REMOVE CRUISE CONTROL MAIN SWITCH
1. Disconnect the connector.
2. Remove the 2 screws and remove the cruise control : main switch.
  
  Fig 1: Identifying Cruise Control Main Switch And Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002