Service Data
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE DATA SPECIFICATIONS - 1NZ-FE ENGINE CONTROL SYSTEM
| Camshaft timing oil control valve assembly | Standard resistance | 6.9 to 7.9 Ω at 20°C (68°F) |
|---|---|---|
| Camshaft position sensor | Standard resistance | 1,630 to 2,740 flat cold 2,065 to 3,225 Ω at hot |
| Crankshaft position sensor | Standard resistance | 985 to 1,600 Ω at cold 1,265 to 1,890 Ω at hot |
| Engine coolant temperature sensor | Standard resistance | 2.32 to 2.59 kΩ Approximately 20°C (68°F) 0.310 to 0.326 kΩ Approximately 80°C (176°F) |
| Throttle with motor body assembly | Standard resistance 1 (M-) - 2 (M+) | 0.3 to 100 Ω at 20°C (68°F) |
| EFI (20A) fuse | Standard resistance 1-2 | Below 1 Ω |
| Knock sensor | Standard resistance | 120 to 280 kΩ at 20°C (68°F) |
| Integration relay | A1 -C1 | Below 1 Ω |
| A1 - A4 | 10 kΩ or higher | |
| A4-C1 | 10 kΩ or higher | |
| A1 - A4 | Below 1 Ω (Apply battery voltage between terminals A2 and A3) | |
| A4-C1 | Below 1 Ω (Apply battery voltage between terminals A2 and A3) | |
| Accelerator pedal position No. 1 standard voltage | Standard resistance Accelerator pedal released Accelerator pedal depressed |
0.5 to 1.1 V 2.6 to 4.5 V |
| Accelerator pedal position No. 2 standard voltage | Standard resistance Accelerator pedal released Accelerator pedal depressed |
1.2 to 2.0 V 3.4 to 5.0 V |