Brake Control Power Supply: Inspection
WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT BRAKE CONTROL POWER SUPPLY ASSEMBLY
- Inspect the brake control power supply assembly. If any of the following occurs, replace with a new brake control power supply assembly:
- The surface of the brake control power supply assembly is cracked, dented, or chipped off.
- The connector is scratched, cracked, or damaged.
- The brake control power supply assembly has been dropped.
- Inspect the brake control power supply assembly. If any of the following occurs, replace with a new brake control power supply assembly: