DTC Check/Clear

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
1. Prepare an intelligent tester and CAN VIM.
2. Connect the intelligent tester (with CAN VIM) to DLC3.
  
  Fig 1: Connecting Intelligent Tester To DLC3
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Turn the ignition switch ON and turn the intelligent tester main switch ON.
4. Using the intelligent tester, check DTCs and note them down. (For further details, see the intelligent tester's instruction book.)
CLEAR DTC
- PRESENT CODE:
  DTC will be cleared when the trouble output as DTC is recovered normally.
- PAST CODE:
  Clear it using the intelligent tester.