Service Data
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Intake air flow meter
INTAKE AIR FLOW METER SERVICE DATA
| Condition | Specified Condition |
|---|---|
| -20°C (-4°F) | 12.5 to 16.9 kΩ |
| 20°C (68°F) | 2.19 to 2.67 kΩ |
| 60°C (140°F) | 0.50 to 0.68 kΩ |
Camshaft timing oil control valve assembly
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY SERVICE DATA
| Condition | Specified Condition |
|---|---|
| Battery positive (+) voltage is applied | Valve moves in left arrow direction shown in the illustration |
| Battery positive (+) voltage is applied | Valve moves in right arrow direction shown in the illustration |
Crankshaft position sensor
CRANKSHAFT POSITION SENSOR SERVICE DATA
| Temperature | Specified Condition |
|---|---|
| Cold | 1,630 to 2740 Ω |
| Hot | 2,065 to 3,225 Ω |
Engine coolant temperature sensor
ENGINE COOLANT TEMPERATURE SENSOR SERVICE DATA
| Condition | Specified Condition |
|---|---|
| Approx. 20°C (68°F) | 2.32 to 2.59 kΩ |
| Approx. 80°C (176°F) | 0.310 to 0.326 kΩ |
Throttle body
THROTTLE BODY SERVICE DATA
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (M+) - 1 (M-) | 20°C (68°F) | 0.3 to 100 Ω |
| 5 (VC) - 3 (E2) | 20°C (68°F) | 1.2 to 3.2 kΩ |
Knock sensor
KNOCK SENSOR SERVICE DATA
| Tester Connection | Specified Condition |
|---|---|
| Measure the resistance between the terminals. | 120 to 280 kΩ at 20°C (68°F) |
Accelerator POS No. 1 Standard Voltage
ACCELERATOR POS NO. 1 STANDARD VOLTAGE SERVICE DATA
| Condition | Specified Condition |
|---|---|
| Accelerator pedal is released | 0.5 to 1.1 V |
| Accelerator pedal is depressed | 2.6 to 4.5 V |
Accelerator POS No. 2 standard voltage
ACCELERATOR POS NO. 2 STANDARD VOLTAGE SERVICE DATA
| Condition | Specified Condition |
|---|---|
| Accelerator pedal is released | 1.2 to 2.0 V |
| Accelerator pedal is depressed | 3.4 to 5.0 V |