LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Engine Ignition System) >> VVT Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VVT Sensor: Removal

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. DRAIN ENGINE  COOLANT 
  3. REMOVE INTAKE MANIFOLD ASSEMBLY 
    1. Remove the intake manifold assembly (see REMOVAL ).
  4. REMOVE VVT SENSOR (for Bank 1) 
    1. Disconnect the connector.
    2. Remove the bolt and sensor.
  5. REMOVE VVT SENSOR (for Bank 2) 
    1. Disconnect the connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals