DTC Check/Clear
WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- DTC CHECK
- Connect a Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the tester ON.
- Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
- Read the DTCs.
- CLEAR DTC
- Connect a Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the tester ON.
- Enter the following menus: Select: Powertrain / Cruise Control / Trouble Codes.
- Erase the DTCs.