September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Cigarette Lighter Assembly: Installation
- INSTALL CIGARETTE LIGHTER ASSEMBLY
- Align the cigarette lighter with the cutout of the hole bezel, and install the lighter to the hole bezel. Then attach the ring nut to the lighter, and turn the ring nut to install it.
- Insert the socket cap and turn it clockwise to install.
- INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (See
INSTALLATION
)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL REAR CONSOLE UPPER PANEL GARNISH (See
INSTALLATION
)
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.