Combination Meter: Installation

INSTALL COMBINATION METER ASSEMBLY
INSTALL TURN SIGNAL SWITCH ASSEMBLY
INSTALL STEERING COLUMN COVER UPPER
INSTALL STEERING COLUMN COVER LOWER (See INSTALLATION )

Fig 1: Identifying Steering Column Cover Lower
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
1. Connect the connector.
2. Attach the 4 clips to install the panel.
  
  Fig 2: Identifying Instrument Cluster Finish Panel Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).