LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Engine Coolant Temperature Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Engine Coolant Temperature Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE V-BANK COVER (See  REMOVAL  ) 
  3. REMOVE NO. 1 AIR CLEANER INLET (See  REMOVAL  ) 
  4. REMOVE INTAKE AIR CONNECTOR PIPE (See  REMOVAL  ) 
  5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the sensor.
    3. Remove the gasket from the sensor.
scientia non olet · About LEMON Manuals