Air Conditioning: Condenser: Reassembly

INSTALL COOLER DRYER
1. Using needle nose pliers, install the cooler dryer.
2. Install 2 new O-rings to the cap.
3. Sufficiently apply compressor oil to the contact surfaces of the O-ring and the cap.
  Compressor oil: ND-OIL 8 or equivalent
4. Using a 10 mm hexagon wrench, install the cap to the condenser.
  Torque: 12.3 N*m (125 kgf*cm, 9 in.*lbf)
  
  Fig 1: Locating Contact Surfaces Of O-Ring And Cap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002