DTC Check / Clear

DTC CHECK
HINT:
- When DTC B1650/32 is detected as a result of troubleshooting for "AIRBAG SYSTEM", perform troubleshooting for the "OCCUPANT CLASSIFICATION SYSTEM".
- Use the intelligent tester to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
1. Check for DTCs.
  1. Connect the intelligent tester (with CAN VIM) to the DLC3.
  2. Turn the ignition switch ON.
  3. Check the DTCs by following the prompts on the tester screen.
    HINT:
    
    Refer to the intelligent tester operator's manual for further details.
2. Clear DTCs.
  1. Connect the intelligent tester (with CAN VIM) to the DLC3.
  2. Turn the ignition switch ON.
  3. Clear the DTCs by following the prompts on the tester screen.
    
    Fig 1: Connecting Intelligent Tester To DLC3
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    HINT:
    
    Refer to the intelligent tester operator's manual for further details.