Inspection Procedure

1. Check the radio condition.

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   Broadcast cannot be selected	A
   Broadcast can be selected, but selection cannot be memorized	B

B:  Go to step  6

A: Go to Next Step 

1. Check if the pay-type contract has been extended, or if the contract period has ended.

   OK: Pay-type contract is valid. 

NG: TO RECEIVE PAY-TYPE BROADCASTS, CONTRACT MUST BE MADE WITH SATELLITE RADIO TUNER COMPANY 

OK: Go to Next Step 

1. Perform activation refresh.

   HINT:

   Refer to the satellite radio tuner company web site. (http://www.xmradio.com/refresh/)

   OK: Malfunction disappears. 

NG: Go to step 4 

OK: END 

1. Check the display screen.

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   "OFF AIR" is displayed	A
   After "-" is displayed, display automatically switches to CH001	B
   Other	C

A: CHANNEL IS CURRENTLY NOT BEING BROADCAST. IF BROADCAST RESUMES, SELECTION CAN BE PERFORMED (CONFIRM WITH RADIO STATION) 

B: CHANNEL BROADCAST HAS ENDED (CONFIRM WITH RADIO STATION) 

C: Go to Next Step 

1. Check for DTCs.

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   "C0-16" is not output	A
   "C0-16" is output	B

B: REPLACE SATELLITE RADIO TUNER ASSEMBLY  (See SATELLITE RADIO TUNER )

A: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )

1. Check if all preset channels have been cleared.

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   Preset channels are not cleared.	A
   Preset channels are all cleared.	B

B:  Go to step  8

A: Go to Next Step 

1. Check if the preset channels that have been cleared can be added into memory again.

   OK: Preset channels can be added into memory. 

NG:  Go to step  9

OK: Go to Next Step 

1. Check if the battery was replaced.

   OK: Battery was not replaced. 

NG: ADD PRESET CHANNEL INTO MEMORY AGAIN 

OK: Go to Next Step 

1. Check for DTCs.

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   "C0-16" is not output	A
   "C0-16" is output	B

B: REPLACE SATELLITE RADIO TUNER ASSEMBLY  (See SATELLITE RADIO TUNER )

A: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )