Inspection Procedure

1. Check if the voice recognition level of the system is low by using only one particular voice.

   OK: Voice recognition level of the system is low with any voice. 

NG: VOICE RECOGNITION LEVEL OF SYSTEM VARIES DEPENDING ON VOICE AND PRONUNCIATION. THIS IS NOT A MALFUNCTION. 

OK: Go to Next Step 

1. Enter the "Mic&Voice Recognition Check" mode (See OPERATION CHECK  ).
2. When a voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
3. Push the recording switch and perform voice recording.

   HINT:

   The recording limit is 5 seconds.

4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

   OK: All check results are normal. 

NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )

Fig 1: Diagnosis Display - Mic & Voice Recognition Check Screen

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK: END