Headlight Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The procedures listed below are for the LH side.
Use the same procedures for the RH and LH side.

INSTALL HEADLIGHT ASSEMBLY
1. Connect the connector.
2. Install the unit with the 2 bolts, nut and clip.
  
  Fig 1: Identifying Headlight Assembly Bolts And Clip
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER ENERGY ABSORBER
INSTALL FRONT BUMPER COVER (See INSTALLATION )
INSTALL FRONT FENDER LINER LH (See INSTALLATION )
INSTALL FRONT FENDER LINER RH (See INSTALLATION )
INSTALL RADIATOR GRILLE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
ADJUST HEADLIGHT AIMING (See ADJUSTMENT )