Height Control Sensor: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR RH
1. Install the height control sensor sub-assembly rear RH with the 3 nuts.
  Torque: Rear suspension member side 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Lower arm side 5.4 N*m (55 kgf*cm, 48 in.*lbf)
2. Connect the connector.
  
  Fig 1: Locating Height Control Sensor Sub-Assembly Rear RH Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION
(See INITIALIZATION ).
VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT (See ADJUSTMENT )
PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) (See ADJUSTMENT )
PREPARATION FOR HEADLIGHT AIMING (Using a Screen) (See ADJUSTMENT )
HEADLIGHT AIMING INSPECTION (See ADJUSTMENT )
HEADLIGHT AIMING ADJUSTMENT (See ADJUSTMENT )