LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2025 >> RX 350h Premium >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Smart Access System (For Start) - Diagnostic Codes >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function, except Gasoline Model) >> DTC U0103-87: Lost Communication with Gear Shift Control Module "A" Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module "A" Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0163-87: Lost Communication with Navigation Control Module Missing Message; DTC U0230-87: Lost Communication with Rear Gate Module Missing Message; DTC U0293-87: Lost Communication with Hybrid/EV Powertrain Control Module Missing Message; DTC U1110-87: Lost Communication with Intuitive Parking Assist Module Missing Message; DTC U1117-87: Lost Communication with Accessory Gateway Missing Message; DTC U114F-87: Lost Communication with Power Integration Module Missing Message [10/2022 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0103-87: Lost Communication with Gear Shift Control Module "A" Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module "A" Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0163-87: Lost Communication with Navigation Control Module Missing Message; DTC U0230-87: Lost Communication with Rear Gate Module Missing Message; DTC U0293-87: Lost Communication with Hybrid/EV Powertrain Control Module Missing Message; DTC U1110-87: Lost Communication with Intuitive Parking Assist Module Missing Message; DTC U1117-87: Lost Communication with Accessory Gateway Missing Message; DTC U114F-87: Lost Communication with Power Integration Module Missing Message [10/2022 - ]: Description

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
U0103-87 Lost Communication with Gear Shift Control Module "A" Missing Message CAN communication error between certification ECU (smart key ECU assembly) and transmission floor shift assembly (1-trip detection logic*1) Transmission floor shift assembly Power Source Control B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
U0129-87 Lost Communication with Brake System Control Module "A" Missing Message CAN communication error between certification ECU (smart key ECU assembly) and No. 2 skid control ECU (brake actuator assembly) (1-trip detection logic*) No. 2 skid control ECU (brake actuator assembly) Smart Access
Power Source Control		 B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
U0140-87 Lost Communication with Body Control Module Missing Message CAN communication malfunction between certification ECU (smart key ECU assembly) and main body ECU (multiplex network body ECU) (1-trip detection logic*) Main body ECU (multiplex network body ECU) Smart Access
Power Source Control		 B DTC Output Confirmation Operation: 
  1. Always
U0155-87 Lost Communication with Instrument Panel Cluster (IPC) Control Module CAN communication malfunction between certification ECU (smart key ECU assembly) and combination meter assembly (1-trip detection logic*) Combination meter assembly Smart Access
Power Source Control		 B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
U0163-87 Lost Communication with Navigation Control Module Missing Message CAN communication malfunction between certification ECU (smart key ECU assembly) and radio and display receiver assembly (1-trip detection logic*) Radio and display receiver assembly Smart Access
Power Source Control		 B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
U0230-87 Lost Communication with Rear Gate Module Missing Message CAN communication malfunction between certification ECU (smart key ECU assembly) and multiplex network door ECU (1-trip detection logic*) Multiplex network door ECU Smart Access B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
U0293-87 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message CAN communication error between certification ECU (smart key ECU assembly) and hybrid vehicle control ECU (1-trip detection logic*) Hybrid vehicle control ECU Smart Access
Power Source Control		 B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
U1110-87 Lost Communication with Intuitive Parking Assist Module Missing Message CAN communication error between certification ECU (smart key ECU assembly) and clearance warning ECU assembly (1-trip detection logic*) Clearance warning ECU assembly Smart Access
Power Source Control		 B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
U1117-87 Lost Communication with Accessory Gateway Missing Message CAN communication malfunction between the certification ECU (smart key ECU assembly) and the option connector (bus buffer ECU) for approximately 10 seconds or more. Option connector (bus buffer ECU) Smart Access
Power Source Control		 B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
U114F-87 Lost Communication with Power Integration Module Missing Message CAN communication error between certification ECU (smart key ECU assembly) and power distribution box assembly (1-trip detection logic*) Power distribution box assembly Power Source Control B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait at least 10 seconds.
  1. *: Only detected while a malfunction is present.
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED

DTC Code Vehicle Condition when Malfunction Detected Fail-safe Function when Malfunction Detected
U0103-87 The vehicle power source mode cannot be turned off by the automatic P position function. (it is possible for the power source to be turned off by manually selecting the P position) -
U0129-87 There is no effect on vehicle behavior. -
U0140-87
  • Doors cannot be locked or unlocked.
  • The warning (wireless buzzer) does not sound.
 -
U0155-87 The warning (meter buzzer) does not sound and no warning messages displayed on the multi-information display. -
U0163-87 "ACC customize" (ACC power source enabled) remains "ON" -
U0230-87 Power back door system does not operate. -
U0293-87 There is no effect on vehicle behavior. -
U1110-87
  • Advanced park (remote controlled) function (exiting parking space function) cannot be used*
  • The vehicle power source mode cannot be turned off by the advanced park (remote controlled) function (entering parking space function). (It is possible for the power source to be turned off manually)*
 -
U1117-87 The hybrid control system cannot be started using the wireless remote control function. -
U114F-87 It will take longer for the automatic power off function to begin operating. -
  1. *: w/ Advanced Park (Remote Controlled Function)
RELATED DATA LIST AND ACTIVE TEST ITEMS

DTC No. Data List and Active Test
U0103-87
U0129-87
U0140-87
U0155-87
U0163-87
U0230-87
U0293-87
U1110-87
U1117-87
U114F-87		 -
scientia non olet · About LEMON Manuals