September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Resistor Relay
- Remove air cleaner and airflow meter. Disconnect fuel pump resistor. Ensure continuity exists between terminals "a" and "b". See Fig 1
and Fig 2
.
- Measure resistance between the following terminals. Resistance between terminals "c" and "d" should be 60-92 ohms and between "e" and "f" should be .70-.94 ohms. If resistor relay does not test as specified, replace relay.
Courtesy of MAZDA MOTOR CORP.
Courtesy of MAZDA MOTORS CORP.