September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Window Mechanism
- Remove door trim panel and water shield. See DOOR TRIM PANEL
.
- Lower glass approximately 3" from the full UP position.
- Loosen nut and washer assemblies and retaining the equalizer bracket to door inner panel. See Figure
.
- With the door open, place hands on each side of glass and pull glass fully into door glass run assembly at B-pillar.
- Tighten nut and washer. Apply downward pressure on the equalizer bracket and tighten nut and washer to 9-14 N.m (7-10 ft. lbs.).
- Cycle door glass to ensure proper functioning and door fit.
- Install water shield and trim panel.