LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1990 >> 626 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Early >> Erasing Trouble Codes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Erasing Trouble Codes

  1. ABS control unit can store 32 trouble codes. Each time step 2) is completed, one trouble code is erased. Step 2) must be completed for each trouble code stored.
  2. Using a jumper wire, connect Green/Red wire and Green/Black wire of check connector. Turn ignition on. Ensure ANTI-LOCK light is illuminated. Wait 1-2 seconds. Turn ignition off. Disconnect jumper wire from Green/Red wire. Start engine. Wait for ANTI-LOCK light to go off. Turn ignition off. Remove jumper wire.
scientia non olet · About LEMON Manuals