LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1990 >> 626 Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crank Angle Sensor >> Removal (RX7)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal (RX7)

Align Yellow timing mark on pulley and indicator. Disconnect sensor connector. Remove blind cap and lock bolt. Remove crank angle sensor.

scientia non olet · About LEMON Manuals